Skip to content

ATTA 60 Gallon Extreme Wedge Auxiliary Tank AT60WX

SKU AT60WX

Please put the Year, Make, Model, Bed Length, and select your Fuel Type of your truck in the section below before adding to cart.

Original price $1,503.75
Original price $1,503.75 - Original price $2,003.75
Original price $1,503.75
Current price $1,203.00
$1,203.00 - $1,603.00
Current price $1,203.00

ATTA 60 Gallon Extreme Wedge Auxiliary Tank AT60WX

ATTA Products are shipped directly from the manufacturer. Current lead time is 4 weeks on all tanks.  Tanks must ship to a business/commercial address. Powder coating or bedliner add 2 weeks to lead time.

The AT60WX, the aluminum 60 gallon extreme wedge auxiliary tank is the smallest of the extreme wedge line. The AT60WX is designed to allow you to see your gooseneck or fifth wheel without blocking the view during hook up to your trailer. The 60 gallon extreme wedge will fit a full size diesel long or short bed truck. NOTE: Must be notched for a short bed Dodge.

To connect this auxiliary fuel tank to your truck, please select either the "Push N Fuel" or the "Freedom Fill" auxiliary connection system. See details below to determine which system will work best for you.

  • CAPACITY: 60 Gallons
  • MATERIAL: .125 gauge aluminum/ fully baffled
  • DIMENSIONS: 18" tall x 18" wide x 60" long
  • FILL NECK: single fill neck/ driver's side
  • FUEL TYPE: Diesel fuel only
  • BED TYPE:  Short & Long bed Ford, Dodge, and GM. NOTE: May interfere with Dodge short bed with factory puck system.
  • NOTE: Add 2.5” to the height of the tank for the fill neck/cap and sending unit cover. Add 1.5” (front & rear) to the width of the tank for the hold down tabs.

To connect this auxiliary fuel tank to your truck, please select either the "Push N Fuel" or the "Freedom Fill" auxiliary connection system. See details below to determine which system will work best for you.


ATTA Is Well Known As One Of The Highest Quality Tank Manufactures In The Industry

Damage Free

Less Than 1% Damage Rate on ATTA Products

Made In The USA

ATTA Are Proudly Made In The USA

Contact Us

Knowledgeable Reps Are Standing By To Help You Find What You Need

The Best Prices

Our Out-The-Door Pricing Can't be beat.

ATTA auxiliary tanks are designed to work with the Freedom Fill Auxiliary System or the Push’N’Fuel Auxiliary System. This tank can not be used with a gravity feed kit. See details below.

“Freedom Fill” Auxiliary Tank System Explanation

When the system is turned on, the Freedom Fill Controller box will sense when the factory tank is approximately at a half a tank, the controller box will then turn the auxiliary in-line pump on, filling the factory tank to approximately three-quarters of a tank. The light on the switch will turn on allowing you to know when the system is transferring fuel. When the factory tank reaches approximately three-quarters of a tank, the pump will then turn off. When the auxiliary tank is empty, the system will not turn on. If the factory tank goes below approximate one-half of a tank, you know the auxiliary tank is empty. When the switch is in the off position, the auxiliary gauge and computer will be off, and will not transfer fuel from the auxiliary tank to the factory tank.

When the truck or the system first turns on, the pump &light will turn on for approximately 5 seconds, then turn off. If the factory tank needs fuel it will then turn back on and begin to transfer fuel. If the factory tank is above approximately ½ a tank, the system will remain off until the factory tank reaches the appropriate level of approximately ½ a tank. If the truck or Freedom Fill System is shut off during fuel transfer, it will not turn back on until the factory tank reaches approximately half a tank.

“Push N Fuel” Auxiliary Tank System Explanation

Whenever the truck ignition is on, you press and hold the momentary switch in the on position. With the switch depressed the inline fuel pump is activated and will begin to transfer fuel from the auxiliary tank to the factory tank. When you let go of the switch, the pump is turned off. The auxiliary gauge reads what is in the auxiliary tank. The factory gauge reads what is in the factory tank.

Do not press the momentary switch for more than 5 minutes, and allow ten minutes between reactivating the switch. This will allow the factory gauge to give a more accurate reading of the factory tank. Do not activate the momentary switch if the factory tank is above 3/4 of a tank. Failure to do so can result in over-filling/over-pressurization of the factory. Do not activate the momentary switch if the auxiliary tank is empty.

For more information on both of these auxiliary tank connection systems click HERE.

The Elite Promise

The Elite Promise

We promise to make it right 100% of the time. We'll take care of any damages or defects, no matter the issue. Just contact our highly-rated USA-based commercial customer service team. Know any purchase from EliteTruck.com comes with the industry's most comprehensive product & service guarantee.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

The Ultimate Under Tool Box Tank - ATTA AT30TB

SHOP NOW