
Vantech Black Aluminum Bolt-On Cargo Rack System Nissan NV Cargo 2012-2021 High Roof Model H3302AA02B
In-Stock
In-Stock
Vantech's 2.1 Series Cargo Rack System for Nissan NV vans provide a more suitable rack if you are looking for a light but heavy-duty cargo rack. Vantech's design improvements have allowed them to increase usability and ease of install, while reducing the overall weight of the system by 20%. This was done by focusing more material in the most crucial weight-bearing points and joints of the system, while reducing the material in areas that hold no structural significance. Modularity has also been increased with the addition of more crossbar mounting holes at shorter intervals across the side rails - meaning you can better pick and choose where your crossbars will go, and how many you may need.
Vantech's 2.1 Series Cargo Rack System has been redesigned to hold up to 750 pounds for Nissan NV vans. Constructed of a heavy duty aluminum and coming in a black finish, the 2.1 Series Cargo rack system is the go to if you need to haul any big loads both commercial and recreational. Vantech has also widened the side-rail accessory slots to better accommodate third-party gear such as awnings and water tanks. Finally, the stronger design allows the whole system to be mounted lower and closer to the roof line, with our new low-profile mounting bases.
The AA configuration is simple and clean. Two “loop” or ‘U’ style end caps on each end of the system closes off the holes of the side rails, and leaves an open ended rack for cargo such as ladders and other long and heavy objects.
The ‘DD’ configuration maximizes aerodynamics in the front and rear. The angled front ‘D’ faceplate acts as a wind foil, and reduces drag as well as wind noise when traveling. The rear mounted ‘D’ faceplate allows for air to smoothly pass over it, but can also be mounted up-side-down to create a wider mouthed basket.
The EB configuration is ideal for hauling larger and longer cargo. The ‘E’ front end acts as an extension to the overall system by adding an extra cross bar up front. This crossbar adds an extra 19.5 inches of space to the H2.1 system and allows for fog lights and other clamp-mounted accessories to be seamlessly integrated to the system. The ‘B’ roller on the rear allows for easy loading and unloading. It also protects your roof line and any high mounted brake lights or reflectors from accidental loading/unloading damage.
The ‘EC’ combination turns your H2.1 into an extended half-basket. The ‘E’ front adds an extra crossbar and extends the front of the H2.1 by 19.1 inches. The crossbar allows for fog-lights and other clamp-mounted accessories to be seamlessly integrated to the system. The ‘C’ rear faceplate closes off the rear and prevents cargo from falling or sliding out from the back of the system.
Vantech 60″ Roller System with 36″ Long Extension Plate for H1 Series Model ROH136-60B The H1 60″ Roller with 36″ Extension Plates extends the c...
View full detailsVantech 60″ Roller System with 36″ Long Extension Plate for H1 Series Model ROH136-60W The H1 60″ Roller with 36″ Extension Plates extends the...
View full detailsVantech Black Aluminum Bolt-On Cargo Rack System Nissan NV Cargo 2012-2021 Low Roof Model H3301DD04B The DD configuration utilizes a 40 degree angl...
View full detailsVantech 3-Bar White Aluminum Bolt-On Ladder Rack System Nissan NV 2011-current Model H1313W The Vantech H1 aluminum 3 bar system can hold up 750 lb...
View full detailsVantech 3-Bar White Steel Bolt-On Ladder Rack System Nissan NV 2011-current Model H1303W The Vantech H1 steel 3 bar system can hold up 750 lbs. The...
View full details