Skip to content
Vantech 3 Bar Aluminum 72" Knapheide Kuv Ladder Rack White Model H51003359W

Vantech 3 Bar Aluminum 72" Knapheide Kuv Ladder Rack White Model H51003359W

SKU H51003359W

In-Stock

$613.44
$613.44 - $613.44
$613.44
$508.64
$613.44
$508.64 - $508.64
$508.64
Save $104.80

Vantech 3 Bar Aluminum 72" Knapheide Kuv Ladder Rack White Model H51003359W

The Vantech H1 top mount aluminum system can hold up 250 lbs. per bar. The cross bars are 2″ X 1″ reinforced extruded aluminum with built-in channels. The Cross bars are protected by a non-slip rubber bar guard on top that is easily pressed into the channels. The aluminum mounting upright is approx. 1/8″ thick at the base. The mounting uprights are 8″ wide at the base and 16.75″ total height with a 7.25″ clearance. The Base is welded complete onto the upright post for complete seal. There are 4x 1″ eyehook per mounting upright. Drilling is required to install this system. 11 gauge steel 2″ X 8″ Heavy-duty interior plate helps evenly spread weight distribution. Rubber caps on the upright post prevent wind noise and water leakage. This system is powder coated white.

  • Includes mounting hardware and gaskets
  • Drilling required
  • 8" wide mounting base
  • Powder coated finish
Vantech H1 Series Rack System for the Knapheide Kuv

Vantech H1 Series Rack System for the Knapheide Kuv

Vantech's H1 Series Rack System for the Knapheide Kuv offers a fast, simple, and rugged solution for your cargo needs. Designed to mount on any Knapheide Kuv, this system can be mounted using the van’s OEM mounting holes (if available), on a van’s drip-rails with their H1 Clamps, or on any flat surface by drilling universal holes.

Carry your loads with ease

Carry your loads with ease

Vantech's H1 Series Rack System for the Knapheide Kuv mounts with easy installation that fits most commercial Knapheide Kuv on the market. Each bar is an evenly distributed load capacity of 250 pounds per bar. Whether you are hauling ladders, Vantech's high quality Conduit Carriers, or any other materials, Vantech is the way to go.

What comes with a Vantech H1 Series Rack System for the Knapheide Kuv

What comes with a Vantech H1 Series Rack System for the Knapheide Kuv

Every Vantech Knapheide Kuv Rack system comes with a variety of parts and accessories. The 2-Bar System comes with two cross bars, four mounts, two bar guards, and one of each of the following: hoop & loop strap, ladder stopper. ladder guide and hardware.

The 3-Bar System comes with three cross bars, six mounts, three bar guards, a single set of hardware and two of the following: hook & loop straps, ladder stoppers, and ladder guides.

Vantech's H1 Series Rack System for the Knapheide Kuv Features

Vantech's H1 Series Rack System for the Knapheide Kuv Features

Vantech Knapheide Kuv Rack Systems come in either a rust free, stainless hardware and light weight aluminum or am economical, galvanized, heavy duty grade steel. Also, every rack comes with holes to mount your rack to your van and holes to insert hook straps to secure your Each rack system comes in a black or white finish.

100's of Vantech products in stock, ready to ship.

The Elite Promise

The Elite Promise

We promise to make it right 100% of the time. We'll take care of any damages or defects, no matter the issue. Just contact our highly-rated USA-based commercial customer service team. Know any purchase from EliteTruck.com comes with the industry's most comprehensive product & service guarantee.

1725

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
N
Neil Mullins
Needs thicker gaskets

The overall product is great. A few things could be added or changed.
The rubber liner that locks into each rail could be longer to cover the whole horizontal rail.
(2) Longer carriage bolts could be offered. At least a 2in.
In my case on the KUV Bed, the rack was being bolted down through two layers on metal with a 1in void.
(3) A thicker gasket to fill between the rack and vehicle would be a plus! The one that comes with the kit is not good. A price of paper would seal up the same.

Overall the rack is great. No whistling noise, ladder straps in well and the racks them self are sturdy as can be.

User picture

Other Recommended Vantech Van Racks

$575.04
$575.04 - $575.04
$575.04
$476.80
$575.04
$476.80 - $476.80
$476.80

Vantech 3-Bar White Steel Bolt-On Ladder Rack System Ford Transit 2015-current Model H1723W

Vantech 3-Bar White Steel Bolt-On Ladder Rack System Ford Transit 2015-current Model H1723W The Vantech H1 Steel 3 bar system for the Ford Transit ...

View full details
$575.04
$575.04 - $575.04
$575.04
$476.80
$575.04
$476.80 - $476.80
$476.80
$383.04
$383.04 - $383.04
$383.04
$317.60
$383.04
$317.60 - $317.60
$317.60

Vantech 2-Bar White Steel 42"- 46" (W) Ladder Rack System Universal Midsize Van Model H2095W

Vantech 2-Bar White Steel 42"- 46" (W) Ladder Rack System Universal Midsize Van Model H2095W The Vantech H1 steel system can hold up 600lb (evenly ...

View full details
$383.04
$383.04 - $383.04
$383.04
$317.60
$383.04
$317.60 - $317.60
$317.60
$651.84
$651.84 - $651.84
$651.84
$540.48
$651.84
$540.48 - $540.48
$540.48

Vantech 3-Bar White Aluminum Bolt-On Ladder Rack System Ford Transit 2015-current Model H1753W

Vantech 3-Bar White Aluminum Bolt-On Ladder Rack System Ford Transit 2015-current Model H1753W The Vantech H1 aluminum 3 Bar System for the Ford T...

View full details
$651.84
$651.84 - $651.84
$651.84
$540.48
$651.84
$540.48 - $540.48
$540.48
$536.64
$536.64 - $536.64
$536.64
$444.96
$536.64
$444.96 - $444.96
$444.96

Vantech 3 Bar Steel 72" Knapheide Kuv Ladder Rack Black Model H51003358B

Vantech 3 Bar Steel 72" Knapheide Kuv Ladder Rack Black Model H51003358B The Vantech H1 top mount steel system can hold up 250 lbs. per bar. The Cr...

View full details
$536.64
$536.64 - $536.64
$536.64
$444.96
$536.64
$444.96 - $444.96
$444.96
$613.44
$613.44 - $613.44
$613.44
$508.64
$613.44
$508.64 - $508.64
$508.64

Vantech 3 Bar Aluminum 72" Knapheide Kuv Ladder Rack White Model H51003359W

Vantech 3 Bar Aluminum 72" Knapheide Kuv Ladder Rack White Model H51003359W The Vantech H1 top mount aluminum system can hold up 250 lbs. per bar. ...

View full details
$613.44
$613.44 - $613.44
$613.44
$508.64
$613.44
$508.64 - $508.64
$508.64
Shop Other Vantech Van Racks

Vantech 3 Bar Aluminum 72" Knapheide Kuv Ladder Rack White Model H51003359W

The Vantech H1 top mount aluminum system can hold up 250 lbs. per bar. The cross bars are 2″ X 1″ reinforced extruded aluminum with built-in channels. The Cross bars are protected by a non-slip rubber bar guard on top that is easily pressed into the channels. The aluminum mounting upright is approx. 1/8″ thick at the base. The mounting uprights are 8″ wide at the base and 16.75″ total height with a 7.25″ clearance. The Base is welded complete onto the upright post for complete seal. There are 4x 1″ eyehook per mounting upright. Drilling is required to install this system. 11 gauge steel 2″ X 8″ Heavy-duty interior plate helps evenly spread weight distribution. Rubber caps on the upright post prevent wind noise and water leakage. This system is powder coated white.

  • Includes mounting hardware and gaskets
  • Drilling required
  • 8" wide mounting base
  • Powder coated finish